Product Code: NK0001
Digital download. A 3D CAD model of a 25.5in scale, 22-fret bolt-on guitar neck with a six-in-line headstock, fretboard, nut, frets and dot inlays, for laying out and visualising your guitar design. Nothing is posted; you receive a download link by email after checkout.
For visual and layout use. Always measure your own parts before cutting.
Please note: no truss rod channel or adjuster access has been added, so you can add those details to suit the truss rod you use.
What's in the download
- 3D model in STEP format (opens in Fusion, SolidWorks, FreeCAD, Rhino, Onshape and most other CAD software)
- The same model in SketchUp format (opens in SketchUp 2017 and later)
- Dimensioned drawing (PDF, SVG and PNG)
- Maple renders, front and back of the headstock (PNG)
- One-page spec sheet (PDF)
- README and licence
Key dimensions
- Scale length: 647.7mm (25.5in), 22 frets
- Width: 42.5mm at the nut, 57mm at the fretboard end
- Fretboard: 9.5in (241.3mm) radius, 6mm thick
- Depth including fretboard: 20.5mm at the 1st fret, 22mm at the 12th, 25.4mm (1in) at the heel
- Heel: 76 x 54.5mm, four neck screw pilot holes (50.8 x 40mm spacing)
- Headstock: 14mm thick, six 10mm tuner holes at 24.4mm pitch, with a smooth carved blend from the neck into the back of the headstock
- Nut 3.5mm thick, set in a slot in the fretboard
- Right-handed. Neck, fretboard and nut are separate named parts; frets and dots are one part each
